Finding your suitable readers for 12 dia cooling fan is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 12 dia cooling fan including detail information and customer reviews. Let’s find out which is your favorite one.
683 reviews analysed
1. (Pack of 2) Engine Radiator Cooling Fan 12 Inch Curved Blade Ultra Thin Universal High Performance 12V 90W Motor，Radiator Fan With Fan Mounting Kit（Puller and Pusher Design）
- The package includes: 2 cooling fans, 2 sets of mounting bracket accessories.
- Basic parameters: The maximum outer diameter is 12 inches. The thickness is 2.49 inches. Maximum air volume CFM = 1650CFM. Maximum fan RPM = 2500RPM. 10 S-shaped blades. 12 volts. 7.6AMPD RAW. 90W.
- OE accessories or replacement. Push-pull. Switch the push-pull working mode: only need to replace the power cord and turn the fan blade over to install. When turning the fan blades, apply anti-loosening glue to the fixed nut to prevent the nut from loosening.
- According to the size of the installation location, the cooling fan with the correct size should be selected so that the ideal heat dissipation effect can be achieved.
- This product is a universal product, which can be used to replace the original car parts, enhanced heat dissipation of agricultural machinery, enhanced heat dissipation of equipment, greenhouse ventilation, and attic ventilation. Just need a suitable installation location and matching power supply, it will not let you down.
The electric slim fan is lightweight, has an ultra slim design so the fan can be installed flush against your radiator, or other applications. It comes with the universal fan mounting kit which make it easy to install. The fan can be used in a wide variety of other applications as well, including A/C condenser cooling, mounting on an intercooler to prevent heat soak during drag racing events, or cooling the radiator in a water-to-air intercooler setup
Puller and Pusher Design：
Puller fans mount on the engine side (back) of the radiator core and pull air through the radiator core. The fresh airflow is pulled through the grille, then pulled through the core, and exits out the back side of the radiator. Puller fans are the desired and most common way of mounting a fan when space is not a limitation between the front of the engine and the back of the radiator core.
Pusher fans mount on the grille side (front) of the radiator core and push air through the radiator core. Fresh airflow enters through the grille, then is pushed through the radiator core, and exits out the back side of the radiator. Pusher fans are used typically where there is a limited amount of space for a properi sized puller fan.
2. Small Oscillating Tower Fan, Portable Electric Desk Fan, Quiet Personal Cooling Fan, 13 Inch, Ultra-Slim, 2 Settings, Rotating Standing Fan Perfect for Indoor Office Home Tabletop
- ????Compactness????This oscillatory fan is designed in a way where you won’t have to think much about the space. It can fit into any narrow area of either your room or desk.
- ????Noiseless????This handy tower fan is equipped with an updated turbine technology with two adjustable fan speeds. This turbine duct system generates only 50 decibels of noise, ensuring you to get cool with serenity.
- ????Space Savior????From your room to your workplace, it can be placed at the smallest of the smallest corners. With a height of 13 inches, this mini tower fan only acquires a space of 4.13 inches.
- ????Robust Oscillation???? The mini structure of this tower fan does not compromise with its cooling capacity. With an oscillation power of around 60 degrees, it not only provides comprehensive coverage to a specific place, but it also assures a well-ventilated room.
- ????Portability????This oscillating fan is amazingly portable. It comes along with a built-in handle allowing you to carry it easily. Also, the weight of 3.2 pounds, makes this fan a lot effortless to move from one place to another, compared to any other similar product.
3. 14" Electric Radiator Cooling Fan Assembly Kit 1750 CFM Universal Slim Engine Fan Mounting Kit Reversible 12V 90W （Diameter 13.82" Depth 2.56")
- Overall Diameter:13.82 INCH,Installation Stand:5.98 INCH, Overall Thickness:2.56 INCH
- 1750 CFM Car Cooling Fans:Amp Draw: 7.5 amp
- Blade Length: 13inches
- Number of Blades: 10
- Blade Type: S
- High-quality, lightweight, and durable
- great as replacement or upgrade from factory parts.
- Simple installation, no modifications required.Fan can be used as pusher or puller with the adaptable mounting kit.
- How to choose the correct fan?Step 1:Confirm the width and depth of your radiator Step 2:Compare the fan diameter and depth with radiator Step 3: Choose the right size fan ATTENTION:It can be installed only if the diameter of the fan is smaller than the width of radiator! Make sure the depth of the fan is smaller than the gap of radiator and other parts!
4. MOSTPLUS Black Universal Electric Radiator Slim Fan Push/Pull 12V + Mounting Kit (10 Inch)
5. CoolingSky Aluminum Shroud + Fan (12 Inches Dia) Kit for Chevrolet Camaro 1970-1981 / Monte Carlo 1978-1987 & C/K Pickup Models
The fan will continuous improve engine cooling functions and the overall performance of your vehicle. All fan shrouds are obviously lighter than your stock one, and are a direct fit the radiator. They will notably improve engine cooling performance by delivering more air to the radiator and driving out excess heat.
Maximum Fan CFM: 1730 cfm
Maximum Fan RPM: 2,250 rpm
Fan Dia. X Height: 12.05″ X 12.05″
Amp Draw: 12.70 amps
6. Primecooling Cooling Fan (12 Inches Dia.) +Aluminum Shroud Kits for Jeep CJ5, CJ6, CJ7 1972-86
This Fan Shroud will continuous improve engine cooling functions and the overall performance of your vehicle. All fan shrouds are obviously lighter than your stock one, and are a direct fit the radiator. They will notably improve engine cooling performance by delivering more air to the radiator and driving out excess heat.
7. SAILFLO 4 inch Inline Duct Booster Fan 110V 12W 76CFM Energy Saving Efficient Exhaust Vent Blower for Home grow tent Shop mall office basement attic etc.(4"/100mm)
- Widely Used — The 4″ inline duct fan is widely used in homes, offices, warehouses, restaurants, bars, shops, shopping malls, grow tents, greenhouses and other places where a lot of air is needed.
- Large Airflow — It is designed with high quality sleeve motor, quiet and service life more than 3 years, with rotational speed 2400 r/min, 76 CFM large airflow.
- Over-heat Protection >
- The motor comes with low operating temperature and low heat generation, the built-in temperature protection device, the contact point is disconnected when the motor overheats, which acts as a power failure protection. double protection is safer.
- DIY Your HVAC System >
- You can supply fresh air with one or more fans to DIY air circulation systems depending on the size of your space.
- Easy to install >
- only connect it with 4″ ventilation pipe, 39″ cable (with no plug), brown live wire, blue neutral wire, easy to install, please fix the fan to avoid noise due to looseness.
8. Iliving 12 Inch Variable Speed Shutter Exhaust Fan, Wall-Mounted, 12"
- 12 inch variable speed shutter exhaust fan with automatic Shutters
- UL listed with speed controllable, permanently lubricated motor
- Corrosion-resistant with OSHA compliant wire guards
- Variable speed functionality with the purchase of the iLIVING ILG8SFSC speed controller. Speed controller sold separately
- 120 Volts,1/20 HP,0.55 amp,1680 rpm,800 CFM ,variable speed functionality requires the purchase of the iLiving speed controller”
The iLIVING shutter exhaust fan is perfect for removing excess heat, moisture, and unpleasant odors from virtually any commercial location, including restaurants, factories, warehouses, barns, and greenhouses. This fan features aluminum blades, OSHA compliant wire guards, and automatic shutters that open and close in tandem with the operation of the fan. The completely enclosed motor is thermally protected and permanently lubricated. The fan comes fully assembled out of the box; only installation required is the electrical hardwire. The shutter fan comes in 8 different sizes: 10 inch, 12 inch, 16 inch, 18 inch, 20 inch, 24 inch, 30 inch, and 36 inch; the 18 inch shutter fan has both a variable Speed ILG8SF24V and a single Speed model. The iLIVING 30 inch and 36 inch shutter fans are only available in single Speed. For variable Speed models, the iLIVING ILG8SFSC Speed controller is sold separately.
9. Primecooling 62MM 4 Row Core Aluminum Radiator +Fan (12 inches Dia.) Shroud for Ford F100 F150 F250 F350 Truck Pickup 1966-79 /Bronco V8 1978-79
- This listing includes radiator +2X12″ fan +aluminum shroud, stringently tested to guarantee optimum performance and dependability
- Leading-edge welding craftsmanship 4 core decent designed, improves cooling by 35 -45% temp
- Full T-6061 aluminum construction. 100% welded by TIG, use of Nitrogen during welding in the furnace for maximum strength
- Engineered to last, perfect fit guarantee
- Build-in trans oil cooler
The aluminum radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight,and high heat transferring aluminum features a tube and fin design that,dramatically increases surface area that enables the heat to dissipate more efficiently. This Aluminum Radiator is at least 40% more efficient than stock ones. Most importantly,it has a much higher capacity for coolant than stock ones,which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.
Radiator Flow: DOWN FLOW
Core Thickness: 2.5″
Core Height: 19.25”
Core Width: 26.375”
Overall Height: 26.375”
Overall Width: 29.5”
Inlet Diameter: 1.75”
Outlet Diameter: 2”
Upper Hose Fitting: PASS
Lower Hose Fitting: DRIVER
Trans Cooler Details: 1/8-27NPT
Mounting Type: BRACKET
Mounting Specs: Ver – 16 1/2 Horizontal – 27 3/8
Maximum Fan CFM: 1730 cfm
Fan Diameter (in): 12.050”
Thickness (in): 2.500”
Number of Blades: 10 blades
Maximum Fan RPM: 2,250 rpm
Blade Material: Plastic
Amp Draw: 12.70 amps
Includes the Mounting Tabs for an Easy Zip Tie Installation
10. AC Infinity CLOUDLINE S4, Quiet 4” Inline Duct Fan with Speed Controller – Ventilation Exhaust Fan for Heating Cooling Booster, Grow Tents, Hydroponics
- Designed to quietly ventilate grow tents, transfer heating/cooling to rooms, circulate air, exhaust odors, and cool AV racks.
- Features an inline speed controller utilizing PWM which can precisely optimize the fan’s speed without generating noise.
- Mixed flow design combined with a DC-powered motor for a truly quiet and energy efficient performance.
- Kit also includes corded AC power adapter, installation manual, and all necessary mounting hardware.
- Duct Size: 4” | Dimensions: 6.9 x 11.9 x 7.4 in. | Airflow: 205 CFM | Noise: 28 dBA | Bearings: Dual Ball
Inline Duct Booster Fan
The duct fan system is designed to quietly cool AV equipment rooms and closets, and to ventilate various air circulation and exhaust projects. Features an inline speed controller utilizing PWM-technology. Contains a mixed-flow design and DC-motor for a quiet and high static-pressure performance. The motor box containing the fan’s impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Complete kit includes one duct fan unit, one inline speed controller, installation manual, all necessary mounting hardware, and a corded AC plug adapter to power the unit through a standard outlet.
Precise Speed Controller
The inline speed controller enables you to set the duct fan’s speed to optimal noise and airflow levels for various environments. Unlike common AC-powered duct fans that suppresses voltage to control fan speeds, this duct fan features a DC-motor that is precisely controlled using PWM (Pulse Width Modulation). This technology enables the fan’s motor to be able to run smoothly at extremely low RPM speeds without generating motor noises and heat as seen on variable voltage controllers. Eight speed options are available with power switch, and backup memory. This S4 model can be connected to the smart controller of the CLOUDLINE T4 to share the same programming and power source.
Quiet and Energy Efficient Design
The inline fan features a mixed flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is being restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids, and performs well even in harsh environments.
By our suggestions above, we hope that you can found 12 Dia Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!