Top 9 80Mm Dash Disk

0
846 reviews analysed

1. Arkon 80mm Adhesive Mounting Disk for Car Dashboards GPS Smartphone Dashboard Disc

Arkon 80mm Adhesive Mounting Disk for Car Dashboards GPS Smartphone Dashboard Disc

Feature

Description

The AP013 80mm adhesive mounting disk allows you to mount an Arkon or third-party 70mm windshield suction mounting pedestal to your car’s dashboard, including Arkon’s mounting pedestal models GN079WD-SBH, GN068WD-SBH, GN022-SBH, GN014-SBH, GN015-SBH, and GN042-SBH. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the disk adhesive to cure on the dashboard before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For a 90mm disk to use with 80mm suction mounts, see Arkon Model AP020.

2. WOLEYI 3-Pack 8CM Adhesive Mounting Disk, Car Dashboard Sticky Pad for Suction Cup Mount

WOLEYI 3-Pack 8CM Adhesive Mounting Disk, Car Dashboard Sticky Pad for Suction Cup Mount

Feature

3. ARKON APVHB20 90mm Extra Strength Adhesive Mounting Disk for Car Dashboards

ARKON APVHB20 90mm Extra Strength Adhesive Mounting Disk for Car Dashboards

Feature

Description

The APVHB20 90mm adhesive mounting disk features an extra-strength 3M VHB adhesive and allows you to securely mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard. Applicable Arkon mounting pedestal models include CM017-KST-2SH, CM078WD-SBH, RM080AMPS, RM0792TWD, and RM0802T. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the extra-strength adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M VHB dash mount disc, then place and press down on a previously cleaned surface. (Allow 24 hours for the adhesive to cure before securing the base of the mounting pedestal to the center of the disk for best results.) WARNING: Use caution and discretion when adhering APVHB20 to your car dashboard or other flat surface. This disk uses 3M VHB adhesive, which is designed to be a PERMANENT solution. Use of this disk may result in permanent adherence to the selected surface. Professional strength solvents or tools may be helpful in removing the adhesive. Arkon is not responsible for any damage caused to your vehicle or other surface due to the installation of this mounting disk. Adhesive disks with a semi-permanent bonding strength (Model AP036 -70mm, Model AP013 -80mm, Model AP020 -90mm) are available from Arkon. For an extra-strength 80mm disk to use with 70mm suction mounts, see Arkon Model APVHB13.

4. Dashboard Pad Mounting Disk for Suction Cup Phone Mount & for Tom Tom Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 70mm Diameter 3 Pcs

Dashboard Pad Mounting Disk for Suction Cup Phone Mount & for Tom Tom Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 70mm Diameter 3 Pcs

Feature

5. LEXONIX Dashboard Pad Mounting Disk Pad for Suction Cup Phone Mount & Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 3.2" Wide 80mm Diameter 1 Pc

LEXONIX Dashboard Pad Mounting Disk Pad for Suction Cup Phone Mount & Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 3.2" Wide 80mm Diameter 1 Pc

Feature

Description

LEXONIX 80mm Adhesive Mounting Disk (1 Pack)

Features:
1. Adhesive mounting disk fits all suction cup mount within 3.6inch in diameter for adhering to dashboards. 
2. Quickly and conveniently exchange suction mount between windshield and dashboard with the disc.
3. Sticky adhesive mounting disk support your suction mount or smartphone & camera securely on dashboard.
4. 1 Disk packed with 1-year warranty.
5. Easy Installation: 1) Clean the dashboard; 2) Remove the protective cover on the base of the disk; 3) Press the disk to the dashboard and leave more than 60 seconds; 4) Attach suction mount on the disc

Warranty and After-Sale Service
All LEXONIX products with 30-day money back and 1-year warranty, if there is any problem with our products, ensure our satisfactory user experience for you, please contact us in your convenience, we shall be pleased to service you, and will reply you within 24hrs after we received your feedback.

Note:

1.It is suggested to allow 24 hours for the adhesive to solidify before securing the base of the mount to the center of the disk

2.How to remove: Saturate the area with Medicinal alcohol or other adhesive removal product, then scrape the adhesive with a dental floss

Any questions you have, please feel free to contact us. We will get you back within 24 hours.

6. Dashboard Pad Mounting Disk, 3 Pack CNSL Magnetic Sticky Adhesive Pads for Suction Cup Phone Mount & Tom Tom Garmin Magellan GPS Suction Sat Nav Dash Camera Phone Holder Stick 3.15" (80mm)

Dashboard Pad Mounting Disk, 3 Pack CNSL Magnetic Sticky Adhesive Pads for Suction Cup Phone Mount & Tom Tom Garmin Magellan GPS Suction Sat Nav Dash Camera Phone Holder Stick 3.15" (80mm)

Feature

Description

Easy to Use Dashboard Pad Mounting Disk. About 80mm diameter fits for almost all Garmin TomTom Magellean GPS mounting pedestals and dashboard suction phone mount.

——Dashboard Mounting Instructions

.First tear off the protective cover on the surface of the gel pad when using.

.Then put it in a proper place, press for a few seconds and release when it’s firm.

.Last fix the object on it, also press for a while to make sure it’s well fixed before letting go.


——Dashboard Mounting ATTENTIONS

.Do not put in the place where children under three years old can touch.

.Do not use in the place where SRS of Automobile is located.

.Do not use in the surface where the paints fall off easily or paper wall.

.Do not use in the place with temperature is higher than 80 degrees.

.Do not use in the obstructing the view of the road or hinder vehicle operation.

7. Lot of 2 Dash Mount Console Discs for Garmin Tomtom Magellan GPS (70mm Diameter)

Lot of 2 Dash Mount Console Discs for Garmin Tomtom Magellan GPS (70mm Diameter)

Feature

Description

The 70 mm round console disk can transform any windshield mount into a console mount. The 3M adhesive is strong yet leaves no residue when removal is required.

8. Dashboard Mount Disc 70mm Diameter 3M Adhseive Dash Mounting Pad for Tom Tom Garmin Magellan GPS Suction Cup Mount Also for Dash Phone Holder – 2 Pack

Dashboard Mount Disc 70mm Diameter 3M Adhseive Dash Mounting Pad for Tom Tom Garmin Magellan GPS Suction Cup Mount Also for Dash Phone Holder - 2 Pack

Feature

Description

Universal Compatibility
About 70mm diameter fits for almost all Garmin TomTom Magellean GPS mounting pedestals and dashboard suction phone mount.

Dashboard Mounting Instructions
1. Choose a suitable location for disk (and pedestal) installation.
Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road or hinder vehicle operation.
2. Clean the dashboard surface area thoroughly with alcohol pad to ensure dashboard is clean and free of any dashboard conditioners or other treatments.
3. Remove the paper backing of the disk and place on the cleaned surface. Press the top of the disk down firmly to allow the adhesive to stick to the surface. Allow 24 hours for the adhesive to cure to the surface before applying any pressure.
4. Place the suction cup of the pedestal (sold separately) firmly down on the center of the mounting disk and lower the securing lever.

Removal Instructions
1. Prepare the surface around the disk by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the adhesive area for about a minute.
2. Take a long piece of dental floss in each hand and slowly work back and forth at the base of the adhesive disk. Gently use the dental floss to cut the adhesive from the dashboard until the black plastic disk is removed.
3. If the sticky adhesive area breaks apart or does not come off completely, re-apply a small amount of alcohol (or adhesive removal liquid) and carefully lift off the remaining area by hand.

Note: Adhesive disk is intended for semi-permanent installation and one-time application. Once removed, it can’t be reapplied.

Package
2 * 70mm Adhesive Mounting Disk

9. Arkon 90mm Adhesive Mounting Disk for Car Dashboards Garmin TomTom GPS Dashboard Disc

Arkon 90mm Adhesive Mounting Disk for Car Dashboards Garmin TomTom GPS Dashboard Disc

Feature

Description

The AP020 90mm adhesive mounting disk allows you to mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard, including mounting pedestals for Garmin and TomTom GPS devices. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the adhesive to cure before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For an 80mm disk to use with 70mm suction mounts, see Arkon Model AP013. For a 70mm disk to use with 60mm suction mounts, see Arkon Model AP036.

Conclusion

By our suggestions above, we hope that you can found 80Mm Dash Disk for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general