Top 9 Fermenter Cooling

This thermostat is simple-stage, electronic temperature controller. The large, lighted LCD screen display is easy to read. The case is designed with fireproof ABS material for human engineering. Temperature sensor is waterproof with high quality, high-accuracy.

Features:
Large LCD screen
Display the sensed temperature, setting temperature, and custom icons on the display indicate working mode, glare free and eye protected.
Support reading with Centigrade or Fahrenheit unit
Easy to use and program
Only 2-step settings for your application, and plug and play design.
With a temperature correction function
Allow user to adjust measuring accuracy base on diferet probe, etc.
Delay starting protection
Protect refrigerating compressor lifetime, avoid compressor to start frequently.
High and low temperature alarms are available
Over-temperature and sensor fault alarm

Specifications:
Power Supply: 100-240VAC 50/60HZ
Max output load: [email protected], [email protected]
Max current: 15A
Temperature Control Range: -40~120℃, -40~248℉
Temperature Control Mode: Heating or Cooling
Temperature Resolution: 0.1℃, 0.1℉
Temperature Accuracy: ±1℃, 1℉
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: Waterproof NTC Sensor
Sensor length:Approx 2m(6 fts)
Input Power Cable Length:150cm (5ft)
Output Power Cable Length: 18cm (7inches)
Controller Dimension: 137*65*28mm

Please note:
The controller will save all settings when power failure. The DIGITEN products are guaranteed to the original owner for one year against defects in workmanship and materials. If there are any questions, please contact us, we will help you.

Packaging include:
1 x DTC151 Temperature Controller
1 x NTC sensor
1 x Manual

Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulated and stable throughout the whole fermentation process to ensure the yeast doesn’t get stressed and ferments correctly to get the right flavour profile. To be able to cool with the Grainfather Conical Fermenter, you need to have the Conical Fermenter Temperature Controller. Then once your target temperature is below the temperature of the wort in your fermenter the Cooling Pump Kit pumps ice cold water through the double walled insulated interior to cool down your wort. Simply connect the couplers and insulated hoses to the Conical Fermenter, submerge the submersible pump into a cooler box with water (add ice for your required temperature) and pump the liquid through the insulated cooling sleeve of the Conical Fermenter body.

This cover is custom designed for the Catalyst Fermentation system using thick 600D vinyl laminated canvas that blocks out 100% of UV light to ensure your beer is protected. Integrated carrying straps make it easier than ever to move your beer around the house, and the reinforced cross stitching is made to last. A handy quick view flap allows you to view your beer during fermentation.

Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year

Package Included:
1x ITC-308 Temperature Controller
1x Manual

Features:

Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year

It has certificate of EMC, LVD, RoHS, FCC compliance.

Package Content:
1x Temperature controller ITC308
1x Manual

Finally an inexpensive and easy solution to keeping your homebrewed beer fermentation temperatures in control. Fermenting your homebrew at the right temperature is one of the critical factors in making good beer. Let the temperature get too warm, and your beer will suffer. The typical desired ale fermentation ranges are 59-72 degrees F. Add in the fact that active fermentation for a 5 gallon batch can raise temperatures 10-15 degrees F. Forget about dealing with that messy homemade swamp cooler anymore trying to keep your beer cold. Cool brewing fermentation cooler is designed specifically to accommodate standard 6.5 and 5 gallon fermenters and carboys. Neatly and easily keep your fermentation temperatures in check. Just add ice packs, ice, (frozen 2-liters work great) or anything cold and switch out as needed to reach the desired temperature. Save time and effort in that the cool brewing fermentation cooler is sealed, insulated and 100% waterproof so it will efficiently and neatly keep your temperatures in check. When you’re done, the cool brewing fermentation cooler easily folds up for storage until the next brew day.