Top 9 Mictuning Dash Switch

0
964 reviews analysed

1. MICTUNING MIC-LSB1 Laser LED Light Bar Rocker Switch ON-OFF LED Light 20A 12V, 5pin, Blue

MICTUNING MIC-LSB1 Laser LED Light Bar Rocker Switch ON-OFF LED Light 20A 12V, 5pin, Blue

Feature

Description

Fashion Cool Illuminated Rocker Switch
MICTUNING 5 Pin rocker switch is a SPST (Single Pole Single Throw) on-off switch that works like a seesaw, easily turning on or off any lights. Its surface cover is designed to be streamline curved with etched patterns. Built-in LED light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles!

It comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends. The whole switch fits into a standard square cut out same as all the other switches for most 4×4, Polaris RZR, Off-road, SUV, ATV, UTV, Polaris Ranger RZR, Motorsport, Boat, Marine, Jeep Wrangler, etc.

Rated at 20Amp 12V/DC and 10Amp 24V/DC, it is mainly used for controlling the LED light fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on. Surface size is 2″ (50mm) x 1″(25mm). Standard size mounting hole 1.41″(36mm) x .86″(22mm).

Warranty
1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service.

CAUTION:We recommend professional installation, pls let professional installer to install the switch by following the wiring diagram included; If let the wire short circuit, it would caught a wire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit and test it after all wire hooked well.

Package included :
1x 5 Pin Rocker Switch
1x Jumper wire set
1x Diagram

2. MICTUNING ACSSB Laser On-Off Rocker Switch with Jumper Wire, 5 Pin, 20 Amp, 12V, LED Lights, Sasquatch Light, Blue

MICTUNING ACSSB Laser On-Off Rocker Switch with Jumper Wire, 5 Pin, 20 Amp, 12V, LED Lights, Sasquatch Light, Blue

Feature

3. MICTUNING LS09901 7 Pin Momentary Laser Rocker Switch Winch in/Out, 20 Amp/12V, Light Blue

MICTUNING LS09901 7 Pin Momentary Laser Rocker Switch Winch in/Out, 20 Amp/12V, Light Blue

Feature

Description

MICTUNING LS09901 20 Amp 12 Volt ON-OFF-ON Rocker Switch LASER ETCHED LED LIGHT BAR WITH TWO L.E.D. LIGHTS.
Double Pole Single Throw ON-OFF-ON Switch. Black hard surface rocker. Surface size is 2″ (50mm) x 1″(25mm). Standard size mounting hole 1.41″(36mm) x .86″(22mm). This is the standard size of most switch holes in modern vehicles.
Upper light is ON when the switch is pressed UP. Lower LED is ON when the switch is pressed Down. Lower LED is independent and can be wired to separate dash light circuit.For eg, the rocker switch can be usd to control 2 seperate LED LIGHTS BARs with MICTUNING Brand 2 LEAD wiring harness.
No rear barriers between terminals. Lower light Waterproof rating of IP66. All symbols are laser etched directly onto the switch face to ensure long image life.

4. MICTUNING Blue ROCK LIGHTS Rocker Switch Kit- On/Off Blue LED Light 20A 12V

MICTUNING Blue ROCK LIGHTS Rocker Switch Kit- On/Off Blue LED Light 20A 12V

Feature

Description

Color:Blue

Fashion Cool Illuminated Rocker Switch
MICTUNING 5 Pin rocker switch is a SPST (Single Pole Single Throw) on-off switch that works like a seesaw, easily turning on or off any lights. Its surface cover is designed to be streamline curved with etched patterns. Built-in LED light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles!

It comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends. The whole switch fits into a standard square cut out same as all the other switches for most 4×4, Polaris RZR, Off-road, SUV, ATV, UTV, Polaris Ranger RZR, Motorsport, Boat, Marine, Jeep Wrangler, etc.

Rated at 20Amp 12V/DC and 10Amp 24V/DC, it is mainly used for controlling the LED light fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on. Surface size is 2″ (50mm) x 1″(25mm). Standard size mounting hole 1.41″(36mm) x .86″(22mm).

Warranty
1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service.

Package included :
1x 5 Pin Rocker Switch
1x Jumper wire set
1x Diagram

5. MICTUNING LED Push Button Switch with Connector Wire Kit for Toyota – Red Laser LED LIGHT BAR Symbol

MICTUNING LED Push Button Switch with Connector Wire Kit for Toyota - Red Laser LED LIGHT BAR Symbol

Feature

Description

Color:red

MICTUNING Customized Laser Etched Symbol LED Backlit Push Button ON/OFF Switch

This NEW high quality 12 volt push switch allows you to operate ANY 12 volt accessories. It fits on all LATE model Toyota’s vehicles, such as FJ Cruiser, Fortune and so on, also compatible with some other model cars. It has short circuit protection to protect your vehicle(s). The switch is made out of heavy duty ABS plastic that will ensure years of service and come in a mate black surface color, the SAME color as the OEM Switches!

It has a face surface size of 1.54″ x 0.83″ and all symbols are Laser Etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life. These high quality PUSH BUTTON SWITCHES feature a backlit panel that illuminates when the switch is turned on. There are 2 LEDs UPPER/ LOWER. 1 LED constant backlit, 1 LED ON when set to ON position. MICTUNING New High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle!

NOTE: The switch is an electronic switch rated at 3 Amp. Therefore in ALL cases the accessory MUST be wired through a fused relay.

COMPATIBLE VEHICLES:

# Toyota FJ Cruiser 2007-2015
# Toyota Fortuner 2005-2014
# Toyota Hilux 2005-2014
# Toyota Tacoma 2005-2011
# Toyota Tacoma 2012-2015 (Left Side ONLY)
# Toyota Highlander 2001-2007
# Toyota Tundra 2005-2007 (Center Console if equipped)
# Toyota 4Runner 2003-2009
# Toyota Prado 120 Series 2003-2009

6. MICTUNING MIC-LSR12 5Pin Rear Lights Rocker Switch On-Off LED Light 20A 12V, Blue

MICTUNING MIC-LSR12 5Pin Rear Lights Rocker Switch On-Off LED Light 20A 12V, Blue

Feature

Description

Color:Blue

Fashion Cool Illuminated Rocker Switch
MICTUNING 5 Pin rocker switch is a SPST (Single Pole Single Throw) on-off switch that works like a seesaw, easily turning on or off any lights. Its surface cover is designed to be streamline curved with etched patterns. Built-in LED light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles!

It comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends. The whole switch fits into a standard square cut out same as all the other switches for most 4×4, Polaris RZR, Off-road, SUV, ATV, UTV, Polaris Ranger RZR, Motorsport, Boat, Marine, Jeep Wrangler, etc.

Rated at 20Amp 12V/DC and 10Amp 24V/DC, it is mainly used for controlling the LED light fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on. Surface size is 2″ (50mm) x 1″(25mm). Standard size mounting hole 1.41″(36mm) x .86″(22mm).

Warranty
1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service.

Package included :
1x 5 Pin Rocker Switch
1x Jumper wire set
1x Diagram

7. MICTUNING LED Push Switch with Connector Wire Kit for Toyota – White FOG LIGHTS Symbol

MICTUNING LED Push Switch with Connector Wire Kit for Toyota - White FOG LIGHTS Symbol

Feature

Description

Color:white

MICTUNING Customized Symbol LED Backlit Push Button ON/OFF Switch

This NEW high quality 12 volt push switch allows you to operate ANY 12 volt accessories. It fits on all LATE model Toyota’s vehicles, such as FJ Cruiser, Fortune and so on, also compatible with some other model cars. It has short circuit protection to protect your vehicle(s). The switch is made out of heavy duty ABS plastic that will ensure years of service and come in a mate black surface color, the SAME color as the OEM Switches!

It has a face surface size of 1.54″ x 0.83″ and all symbols are Etched directly onto the switch face using modern high Tech engraving equipment to ensure long image life. These high quality PUSH BUTTON SWITCHES feature a backlit panel that illuminates when the switch is turned on. There are 2 LEDs UPPER/ LOWER. 1 LED constant backlit, 1 LED ON when set to ON position. MICTUNING New High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle!

NOTE: The switch is an electronic switch rated at 3 Amp. Therefore in ALL cases the accessory MUST be wired through a fused relay.

COMPATIBLE VEHICLES:

# Toyota FJ Cruiser 2007-2015
# Toyota Fortuner 2005-2014
# Toyota Hilux 2005-2014
# Toyota Tacoma 2005-2011
# Toyota Tacoma 2012-2015 (Left Side ONLY)
# Toyota Highlander 2001-2007
# Toyota Tundra 2005-2007 (Center Console if equipped)
# Toyota 4Runner 2003-2009
# Toyota Prado 120 Series 2003-2009

8. MICTUNING 3 Gang Aluminum Rocker Switch Panel – 5 Pin ON Off Toggle Switch with Blue LED Backlit, Wiring Harness Pre-Wired Easy Installation 12 24V for Boat Car Marine ATV UTV

MICTUNING 3 Gang Aluminum Rocker Switch Panel - 5 Pin ON Off Toggle Switch with Blue LED Backlit, Wiring Harness Pre-Wired Easy Installation 12 24V for Boat Car Marine ATV UTV

Feature

9. MICTUNING Backlit FOG LIGHTS Symbol Push Button with Wiring Kit ON-OFF Switch for Toyota (Blue, Surface Size 1.28 x 0.87 inches)

MICTUNING Backlit FOG LIGHTS Symbol Push Button with Wiring Kit ON-OFF Switch for Toyota (Blue, Surface Size 1.28 x 0.87 inches)

Feature

Conclusion

By our suggestions above, we hope that you can found Mictuning Dash Switch for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general